Steel should be packaged according to national standards and contracting requirements. In general, the contents of the package are (except for special requirements in the contract):
(1) Profiled steel with a diameter or thickness of less than 30 mm and a thin plate with a thickness of less than 4 mm shall be delivered in bundles. Each bundle shall be of the same batch number, and each bundle shall be affixed with at least two signs. The nameplate shall indicate the manufacturer's name, steel number, furnace (can) number, specifications, etc.
(2) Steels with a diameter or thickness equal to or greater than 30 mm may be delivered in bundles or may not be delivered in bundles. For bundles of steel, each bundle shall be affixed with at least two signs, steel may not be stamped. Bundles of steel that do not carry signs should be stamped or marked on the top steel or plate of each bundle. Steel that is not bundled must be stamped on each steel or steel plate.
(3) After the steel is packaged (or not supplied in bundles), it shall be painted according to the relevant standards.
(4) Steel delivered in bundles, each bundle shall be bundled with wire at not less than two places.
(5) The weight of each bundle shall not exceed 80kg when manually loaded and unloaded, and shall not exceed 5t when mechanically loaded and unloaded. After the consent of the purchaser, the manual loading and unloading may not exceed 130kg per bundle, and the mechanical loading and unloading may not exceed 10t per bundle.
In order to facilitate the distinction and use, all kinds of steel should have the mark, that is, the stamp.
The stamp shall be applied to the end face of the steel or to the surface of the steel 100 mm from the end of the steel. The contents include steel grade, furnace number, tank number, spindle number, section number, etc. For steel stamps with a diameter or side length greater than 40 mm, it can be punched on the end face. For steel stamps with a diameter or side length of less than 40 mm, it can be hit on the end face, or on an iron plate, and the iron plate is hung on the steel.
We can supply rebar rolling mill and wire rod mill equipment designing, manufacturing, installation, and commission of the equipment with “turn-key” service.
We can also design, manufacture and revamp other non-standard equipment according to the requirements of users.
If interested, please mail at marketing2@hanrm.com.
first off, a hearty thanks to you. Your blog is awesome and completely knowledgeable and I completely satisfied with the reading. Keep your work spread till long after. For more carbon steel flanges manufacturers in india related information visit victorsteel.Certainly, you are Right!!
ReplyDeleteI will prefer this blog because it has much more informative stuff. Visit Swage Nipple manufacturers in India for more related information and knowledge.
ReplyDeleteThanks for such a pleasant post. This post loaded with lots of useful information. Keep it up. If you are looking for the best information and suggestions related to is 2062 grade b then visit tritonalloysinc.
ReplyDeleteYour contents are completely awesome and share worthy. I really appreciate your efforts that you put on this. Keep sharing. For more Stainless steel sheet manufacturers in India related information visit sanghvienterprise
ReplyDelete